It is currently Wed, 22 May 2013 00:35:32 GMT



 
Author Message
 Making mklinux cd (was mac 6100/66 and mklinux)
Hi again,
I downloaded the dr-3 mklinux raw image from apple's site. Made a cd of
it under XCDRoast that i can fully read and browse on my PC Linux box.

The problem is I cannot get it to read on my mac power pc 6100/66.
The cd-rom is an Apple 4X SCSI cd-rom that is known good (I can read the
system cd I borrowed just fine as well as some kids game cd's (hybrid
pc/mac) I installed system 7.5 on the mac this weekend.

Did I burn the cd wrong?(wrong extensions?) I used Rockridge with
Win95/NT (default) which makes all of my other cd's fine. It includes
Rockridge with anonimity and allows long filenames.
Is it the system 7.5 and I need to get an upgrade?

Any help would be greatly appreciated.

Thanks
J-L
jlbo...@usa.net

--- forwarded mesaage follows ---
You need to have at least a small MacOS partition with the MacOS
installed
on it, because MkLinux can't boot by itself.  It boots via the MkLinux
Booter, a MacOS system extension which is invoked by the MacOS boot
code.

Once MkLinux is up and running, it takes over the machine completely,
but
you still need the MacOS to get it up and running.

--
Jon Bell <jtb...@presby.edu>                        Presbyterian College

Dept. of Physics and Computer Science        Clinton, South Carolina USA

        [     Information about newsgroups for beginners:     ]
        [ http://www.**-**.com/ ]

--- forwarded mesaage follows ---
Hi,
Is it possible to install mklinux dr-3 on an old mac 6100/66 (w/ 40mb
ram and a 340 scsi hdd )I have without having the mac os on it. I have
to do a bare bones install on a clean machine as I no longer have any
mac stuff. I have a pc already running mandrake linux (=redhat 5.2) and
want to put this old mac into service again just as an internet box on
my network.

On my pc linuxbox I have downloaded the DR-3 cd-image and will try to
burn the raw image  tonight with X CDRoast. However everything I read
says do such and such on the mac os side, do so and so in the mac os
etc.

Does anyone have the steps down to load mklinux on a bare 6100/66?

Thanks

J-L
jlbo...@usa.net



 Fri, 14 Sep 2001 03:00:00 GMT   
 Making mklinux cd (was mac 6100/66 and mklinux)

did you burn it as a raw image? the image includes a hybrid
iso9660-joliet(iirc)/hfs filesystem.

--
Tom Vier - 0x82B007A8
thoma...@erols.com
http://www.erols.com/thomassr/zero/



 Sat, 15 Sep 2001 03:00:00 GMT   
 Making mklinux cd (was mac 6100/66 and mklinux)

The Apple 4x is a pretty old mechanism; I suspect it pre-dates (and
therefore doesn't support) CD-R.

Software-wise, you would need "Foreign File Access" and "ISO-9660" in
Extensions folder, I guess.

--
--------------------
Matthew Pritzker                Graduate Research Assistant
mprit...@iucf.indiana.edu       IU Physics Dept.



 Sat, 15 Sep 2001 03:00:00 GMT   
 
   [ 3 post ] 

Similar Threads

1. mac 6100/66 and mklinux.

2. Help! PPC 6100/66 and MkLinux

3. installing MkLinux DR3 into a 6100/66

4. MkLinux problems on 6100/66

5. does MKLinux run on 6100/66 + G3 Card ?

6. MkLinux/LinuxPPC on 6100/66?

7. MKLinux Power Mac 6100/G3 Upgrade Card

8. MkLinux DR3 installation on PPC Mac 6100/60 ?

9. Install woes on a 6100 using Mklinux DR3 on CD

10. LinuxPPC-Q4 on a Power Mac 6100/66 ?


 
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software