It is currently Sun, 29 Nov 2020 12:27:29 GMT



 
Author Message
 7 Server Data In phase parity error?
We have an AXi 440 box with a pair of IBM 18gb drives (DNES 318350
SA30) along with a CDROM, running Easy Access Server 7, which reports
Data In phase parity errors on bootup, then reports reducing transfer
rate on ID6, the CD.   5.7 bootup reports level 106541-08.  We've
located a patch 106925-02 which refers to the glm driver but cannot
determine the actual reason for this patch.  Any ideas before we
blindly start applying patches?

Termination is provided by the CDrom at the end of the chain and the
drives are mounted in hotswap carriers.  We do believe termination is
correct but cannot inspect the system as it's at a customer site.

tx

eno



 Sun, 25 Aug 2002 03:00:00 GMT   
 7 Server Data In phase parity error?
Disregard; problem was a removed term jumper on the CD.  


 Sun, 25 Aug 2002 03:00:00 GMT   
 
   [ 2 post ] 

Similar Threads

1. Solution : SCSI bus DATA IN phase parity error

2. Phase parity error

3. PHASE PARITY ERROR

4. SCSI transport failed (bus message OUT phase parity error)

5. SCSI bus MESSAGE OUT phase parity error

6. Phase parity error

7. UE 450 SCSI problems - phase parity error

8. SCSI bus MESSAGE OUT phase parity error ???

9. phase parity error

10. aic7xxx: scsi parity error in command phase


 
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software